nissan primera p12 aftermarket headunit |
Post Reply | Page 123 9> |
Author | |
bongo
NPOC Guest Joined: 26 Jun 2011 Online Status: Points: 10 |
Post Options
Thanks(0)
Posted: 26 Jun 2011 at 8:25pm |
as title states can it be done.... the orginal cd unit was jammed up. Its not my car i was taking a look as a favour. The owner went out an purchased a new headunit with an ipod connection and an autoleads adapter for that model according to halfrauds ... So what i thought was going to be an easy plug and play has turned into a nightmare that i dont need on a sunday night.
So after looking at the plugs and what halfrauds had sold her, and then going up to halfrauds myself to argue that the plug is not the right one and getting no where i got out the test probe and had a probe about I have found a permanent feed, illumination and ignition feed. . . . can the orginal earth be used and if so which one is it or is it better to run my own earth The next problem is the speaker wires can anyone tell me the colours so i can cut the plug and connect up to the new unit. I have tried the display with the aircon with the cd unit disconnected and everything else is working fine so i was thinking of just hooking up to the required feeds which i have already located and hopefully the speaker wires are just a case of cutting orginal plug and solder up to new plug. Any help is much appreciated |
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
Oh dear i don't think you are going to like this. The Units supplied in the P12 are integrated in to the electronics and especially the sat nav system (you have nto told us your model version) I have checked our 'how to' section and specialist ICE section that you will ot have access to . I can not find any post that has been successful upgrading the unit. There are however other ways of integrating MP3 players.
I can tell you that the aerials act as the earth and form the circuit for the power
|
|
bongo
NPOC Guest Joined: 26 Jun 2011 Online Status: Points: 10 |
Post Options
Thanks(1)
|
ok well its not the sat nav model its the poverty spec model (1.8s P12)
it has just the basic cd unit slot at bottom of dash.. i have disconnected that and the plugs are hanging out the dash i cant see how it wouldnt work hooking up an aftermarket unit as the aircon and display all work, all the buttons on controls work obviously just none of the audio functions work and no audio display on the screen i have sourced the power feeds i need i just wondered if anyone knew the colour of speaker wires that way i can trial a fit by hooking up new system to the the required feeds and speakers then if all going well i would then mod the slot in dash to accept the unit |
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(1)
|
OK, the best thing to do is go to our 'How to@ section at the top you will find a link to a free download of the electronic service manual, the info will be found there
|
|
hairy
NPOC Guest Joined: 20 Apr 2007 Location: Shropshire Online Status: Points: 82 |
Post Options
Thanks(1)
|
Hi bud - I've got an ISO connector lead in front of me that I used for a while to connect a Parrot handsfree kit (which can also be used to fit aftermarket headunits). If it helps, the 2 grey leads are right front pos/neg, the purple/black are right rear pos/neg, white leads are left front pos/neg and the green ones left rear pos/neg. I'm pretty sure the colours did match my P12 speaker wiring. Hope that helps mate. Cheers Simon
|
|
hairy
NPOC Guest Joined: 20 Apr 2007 Location: Shropshire Online Status: Points: 82 |
Post Options
Thanks(1)
|
Actually mate if you can wait a couple of days and want to private message me your address, you can have it gratis as I'm not planning on using it again.
|
|
stonegrey
NPOC Guest Joined: 11 Mar 2007 Location: De Cymru Online Status: Points: 5672 |
Post Options
Thanks(1)
|
it has been done, IIRC, there was a guy from Scandinavia who successfully fitted an aftermarket headunit to a P12.
as for off the shelf harness adapters, i'd be amazed if you ever find one. download the P12 FSM here: http://www.npoc.co.uk/forum/nissan-primera-factory-service-manuals_topic29493.html i haven't read it myself, but it should contain wiring diagrams etc. |
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(1)
|
front lh= =l; fr lh- =lg; f rh + = BR; f rh - = BR/W
|
|
bongo
NPOC Guest Joined: 26 Jun 2011 Online Status: Points: 10 |
Post Options
Thanks(1)
|
right cheers for info ive got the manual and on research i think i can figure it out using the following
front left + = L (guessing is blue ?? ) front left - = LG (blue/green) pins 6 and 5 front right + = Br (brown) front right - = Br/W (brown/white) pins 8 and 7 rear left + = L/G (blue / green) rear left - = B/Y (black/yellow) pins 10 and 9 rear right + = L (blue) rear left - = P (pink) pins 12 and 11 im sure ive got what im looking for but if anyone spots a flaw let me know before i go short out her nice new stereo cheers |
|
bongo
NPOC Guest Joined: 26 Jun 2011 Online Status: Points: 10 |
Post Options
Thanks(0)
|
cheers for the offer hairy... its the colours on the cars orginal harness im after though not the aftermarket iso connecters
cheers anyway |
|
Post Reply | Page 123 9> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |