Nissan Primera P12 tyre pressure sensors reset Q ? |
Post Reply | Page <1234 6> |
Author | |
Boomting
NPOC Guest Joined: 16 Dec 2012 Location: Surrey Online Status: Points: 20 |
Post Options
Thanks(0)
|
Can I ask how much the ring only was? Cheapest CV's I've been quoted are £150-160 up to £380 +vat for a Nissan dealer near Gatwick. (That was for 1.5 hours if everything came off the car easily!) I should have made it clear I only wanted a CV joint. Not to pay for his holiday!
|
|
George Orwell never said it would be this bad.
|
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
It was back in 2013 I have just pulled out the bill, it was £10.00 for the ring, £30.00 to fit total £48 inc VAT, Just looking on Ebay they are £1.99 upwards
|
|
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
Hello guys.
I have a Primera tspec 04 and I fitted new alloy's and tyres together with new Autel sensors. I got to the point of programming all sensors with the Autel diagnostic tool but I simply cannot put the car in learning more.i saw some videos on YouTube with a wire behind one but there is none! Any advice regarding how to put it in learning more please? |
|
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(1)
|
Which of the Autel diagnostic tools did you use? If it's any of their tpms tools, yes you could wake the sensors up, but none to the best of my knowledge can programme the sensor to the Primera. However, you could copy the ID of your old sensors to the new MX sensors and install them to the wheels from which you have copied respectively.
|
|
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
Hi,
This is the one I use: https://imgur.com/a/urlT6Dz If you can detail me your idea will be grateful. I still got the old tyres but I think only 3 of them still works. You reckon that if I clone the old ones the system that will do the trick? I'm struggling from August to fix this..there's absolutely no info about this..probabil very rare primeras out there with TPMS! |
|
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(1)
|
Yes, you can clone the IDs with the TS401. Once you've retrieved each ID depress the Y button, which will take you into the programming mode for cloning.
|
|
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(1)
|
Check these: https://www.youtube.com/watch?v=s4fWyQtXMuw https://www.youtube.com/watch?v=vwMxHx8WoYw
|
|
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
Hello Guys,
I have managed to Copy by activation the old 4 TPMS and copy to the new ones. I have put 32 psi in front wheels and 29 psi in back wheels as the plate near drivers door specify. Now the problem is the system still don`t see them.I've double check them and all work and are transmitting have the same id as the old ones but the car still sees it as a problem. What I can do more? |
|
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
Well you have to place each sensor on the wheel where the ID was originally registered.
|
|
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
OMG...i have no idea in which order was..
|
|
Post Reply | Page <1234 6> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |