Nissan Primera P11 MOT today = Miserable fail! |
Post Reply | Page 12> |
Author | |
gdl
NPOC Guest Joined: 05 Dec 2009 Online Status: Points: 77 |
Post Options
Thanks(0)
Posted: 19 Jun 2010 at 8:17am |
Sorry to resurrect a dead thread, but I am looking at doing mine too. They are so rusty I can't really see what holds them in. Is it just an interference fit or is there some clips in among all the crud somewhere?
Cheers, GDL.
|
|
DENNYBOY
NPOC Guest Joined: 10 Dec 2007 Location: Felpham Online Status: Points: 1399 |
Post Options
Thanks(0)
|
Nice one will have to remember this for when my ball joints funk up. |
|
I'm no expert - An "Ex" is a has been and a "Spurt" is a drip under pressure!!
|
|
Roylewaa
NPOC Guest Joined: 14 Jan 2010 Location: Sacriston Online Status: Points: 135 |
Post Options
Thanks(0)
|
Yes I think he means the king pin bearings Dennyboy, He said they were halfway up the strut so I reckon its those he's on about, I know, It threw me when he said wishbone bearing
I'l price the bearings at Andy Page's tomoz, There is a breaking 98 SRI in my local scrappy, might be worth checking the conditions of the front struts, however with bearings and the like id rather replace with new parts, as whats to say the ones in the scrappy arnt knackered aswell
Yes Satanism I think balljoint aswell
|
|
1996 Nissan Primera P10 SRI loon
|
|
twelve
NPOC Legend Elite Top Tosser Joined: 04 Oct 2008 Location: Frimley Online Status: Points: 9688 |
Post Options
Thanks(0)
|
You don't but it's a hell of a lot easier. |
|
|
|
satanism
NPOC Guest Joined: 24 Jun 2009 Location: Canterbury Kent Online Status: Points: 1032 |
Post Options
Thanks(0)
|
no you don't :) done both sides on mine this winter... |
|
P11GT 1998 RHD
SR20VE wannabe 2005 Nissan Primera P12 "Acenta" Estate 2.2dCi 138HP LHD |
|
DENNYBOY
NPOC Guest Joined: 10 Dec 2007 Location: Felpham Online Status: Points: 1399 |
Post Options
Thanks(0)
|
Yep that is the ball joint. You will need to replace the whole lower arm iirc.
|
|
I'm no expert - An "Ex" is a has been and a "Spurt" is a drip under pressure!!
|
|
satanism
NPOC Guest Joined: 24 Jun 2009 Location: Canterbury Kent Online Status: Points: 1032 |
Post Options
Thanks(0)
|
there are 2 bushes and the SEC.40L from the picture that can be replaced(you tell the name, i don't know it in English) on the lower arm. possibly ball joint is the word I need
|
|
P11GT 1998 RHD
SR20VE wannabe 2005 Nissan Primera P12 "Acenta" Estate 2.2dCi 138HP LHD |
|
DENNYBOY
NPOC Guest Joined: 10 Dec 2007 Location: Felpham Online Status: Points: 1399 |
Post Options
Thanks(0)
|
The wishbone bearings that you listed, does the tester mean the king pin bearings as there is no bearing on the wishbone.
As for you mechanic saying not to replace the bearings as they won't last he is talking crap. As long as you get a good quality replacements and they are fitted properly they will be as good as new. If you do replace them get the seal and metal cap as that will stop the water getting in and funking you new bearings.
Front anti roll bar links are a easy fix and will cost about £15ish from a motor factors.
There are no rear anti roll bars on a P11 so not sure what item 2 on your list is.
The strut movement can be sorted with a trip to your local scrap yard.
a bit of welding and your sorted
|
|
I'm no expert - An "Ex" is a has been and a "Spurt" is a drip under pressure!!
|
|
Roylewaa
NPOC Guest Joined: 14 Jan 2010 Location: Sacriston Online Status: Points: 135 |
Post Options
Thanks(0)
|
I think so yes
|
|
1996 Nissan Primera P10 SRI loon
|
|
satanism
NPOC Guest Joined: 24 Jun 2009 Location: Canterbury Kent Online Status: Points: 1032 |
Post Options
Thanks(0)
|
wishbone is that the lower arm?
struts are the same iirc
|
|
P11GT 1998 RHD
SR20VE wannabe 2005 Nissan Primera P12 "Acenta" Estate 2.2dCi 138HP LHD |
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |