Nissan Primera SR20 swap no spark from the coil..

hello i'm zip from italy.. i have some little problem with my car..
my original engine broke the engine block after a lot of knocking...my engine:
so i replace it with this one...



i have used my loom my ntc sensor my distributor ,my coil and my injector..
i never change the flywheel and a lot of parts because i tink it was the same..
my problem is that che engine won't start..
the 12v arrive to the coil when i turn my key to on but the coil won't produce the spark when i try to ignite the car...
the distributor receive the signal from the cam but won't receive the spark from the coil
(the car run fine after destruct the engine block)

i'have try to change the coil with another brand new but with no results...

what i have take wrong?

please help me..sorry for my bad english

zippo from italy

Ive not got any ideas but you've taken a highport out and put a lowport in, shouldnt make a difference, but not sure, may be some other wiring that needs changing possibly?

There are 2 brown plugs taped in to the loom, one is linked to the distributor (can't remember if both are tbh) are these still in place? There's also a 3 wire plug that plugs in to a grey small box that just sits on the back of the engine, don't think i found the exact job of it but remember it being ignition related

There all easy to have missed so worth checking, especially the one on the back of the block (almost missed it myself)

Ant-Dat wrote: I'm guessing you have a P10?

yes p10

the engine came from another p10 of 1994 (mine was 1992)
(different injector, ntc sensor and intake pleunm)

bump