nissan primera p11 engine problems |
Post Reply | Page 12> |
Author | |
deano501
NPOC Guest Joined: 29 Aug 2011 Online Status: Points: 12 |
Post Options
Thanks(0)
Posted: 07 Feb 2015 at 9:44am |
my 1.8 p11 2000 model starts and runs fine until after about 3 miles then cuts out and wont restart until its been left for about half an hour.. ive changed the coil packs but nothing has changed. could this be fuel related or is there another common fault that could be causing this.. its a petrol model.. thanks deano 501
|
|
deano501
NPOC Guest Joined: 29 Aug 2011 Online Status: Points: 12 |
Post Options
Thanks(0)
|
i have now changed the fuel filter and still the same thing is happening.. rather stuck now any ideas... thanks deano501
|
|
p11primeragt
NPOC Guest Joined: 29 Jul 2011 Online Status: Points: 18750 |
Post Options
Thanks(0)
|
Have you got the engine management light on?
Sounds more like faulty cam or crank sensor.
|
|
deano501
NPOC Guest Joined: 29 Aug 2011 Online Status: Points: 12 |
Post Options
Thanks(0)
|
yes the light is on on the dash..
are the cam and crank sensors an easy diy fix or is it a trip to the garage. |
|
p11primeragt
NPOC Guest Joined: 29 Jul 2011 Online Status: Points: 18750 |
Post Options
Thanks(0)
|
Both sensors are just plug and play.
Best getting a cheap diagnostic scanner which plugs into the diagnostic socket,it will tell you the fault code.Therefore no guessing.
|
|
TheStigP11GT
NPOC Guest Joined: 10 May 2003 Location: Dunfermline Online Status: Points: 12684 |
Post Options
Thanks(0)
|
The Bluetooth elm scanner works well for Android connectivity to get EML codes.
|
|
Primera GT - SR20VE.N1 / Qashqai 1.5 N-Tec K9K / Pulsar 1.5 N-Tec K9K http://www.neovvl.com |
|
deano501
NPOC Guest Joined: 29 Aug 2011 Online Status: Points: 12 |
Post Options
Thanks(0)
|
Thanks are the sensors the same as when looking up both they look indetical to each other.
|
|
imckay
NPOC Member Joined: 11 Mar 2007 Location: Manchester Online Status: Points: 3374 |
Post Options
Thanks(0)
|
You can run a self diagnostic to get the fault codes.
You just need a thin piece of wire. Diagnostic port is below the fuse box to the right of the steering wheel. http://www.npoc.co.uk/forum/p11144-diagnostic-check-clear-and-codes_topic8946.html Or get an OBD2 Code reader. |
|
redshark1
NPOC Guest Joined: 31 Mar 2007 Location: Yorkshire (West) Online Status: Points: 1826 |
Post Options
Thanks(0)
|
Its been said on here the sensors are the same. Possibly the wire length could be different but not sure.
|
|
See my Nissan Primera P11-144 common faults and fixes guide:
|
|
deano501
NPOC Guest Joined: 29 Aug 2011 Online Status: Points: 12 |
Post Options
Thanks(0)
|
THANKS GUYS FOR YOUR HELP. CHANGED THE CAM SENSOR THIS AFTERNOON AND EVERYTHING SEEMS TO BE FINE NOW... IS IT WORTH DOING THE CRANK SENSOR ASWELL JUST TO BE ON THE SAFE SIDE... DOES THE ENGINE LIGHT NEED RESETTING OR WILL IT GO OUT BY ITSELF? MANY THANKS ONCE AGAIN FOR YOUR HELP.. DEANO501
|
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |