Nissan Primera P12 Xenon light problem |
Post Reply | Page <123> |
Author | |
toensberg
NPOC Guest Joined: 01 Nov 2013 Location: Norway Online Status: Points: 6 |
Post Options
Thanks(0)
|
Hi, I just posted my problems to this list. I have exactly the opposit problem;
Daytime, both HID lights is on. Nighttime, left one lights, right one goes off. I found one relay in the relaybox which works with the left light. I have mixed all those similar relays and they all works with the left light, so they are probably ok. Are there a spesific relay also for the right HID light ? Thanks Terje Norway
|
|
petterg
NPOC Guest Joined: 01 Jun 2014 Location: Norway Online Status: Points: 396 |
Post Options
Thanks(0)
|
On page LT28 you'll find that in night-mode, RH low beam and LH low beam go via individual relays and individual fuses. On page LT32 it looks like thees are labled 36 (RH fuse), 37 (LH fuse), E14 (LH relay), E20 (RH relay). Fuses are 15A on diesel engine models, 20A on petrol models.
If relay and fuses are ok, the next place to look is the high/low beam switch. From your name, it looks like we're neighbors. Bor ved Husvikveien. |
|
toensberg
NPOC Guest Joined: 01 Nov 2013 Location: Norway Online Status: Points: 6 |
Post Options
Thanks(0)
|
Hi Petter
Thanks for your comments.
I have seen those pages, in fact I have all this printed out on paper. Those 2 fuses for low beam are marked on the top on the fuse box, but I cannot find any markings for the relay box. All relays seems to be okey though, and I have located the relay for the right low beam, but where/which is the relay for the right low beam ? (There is no clicking sound from any other relays, so there is obviously no signals) As you suggest the problem may be in the high/low switch when in night position....? (My front foglights will not come on either, fuse and bulbs are ok, so the switch may have other issues too) You are right, we are as good as neighbors. Maybe we could have a chat and share these things ? Jeg bor i Gamle Kongevei 26, 3170 Sem. Terje Stendal 92418407 |
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
Have a look at page PG-93 for a diagram of the fusible link box and more
|
|
carmona
NPOC Guest Joined: 07 Aug 2014 Location: israel Online Status: Points: 5 |
Post Options
Thanks(0)
|
hello
the post is relevant. Im looking for the "day light control unit" and all I have funde is relay-25230-9f905snd Im not sure its the unit. I hope for help. add some pic' p12 2007 2.0 carmi |
|
damn...
|
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(1)
|
http://www.npoc.co.uk/forum/howto-post-pictures-using-imgur_topic74431.html |
|
carmona
NPOC Guest Joined: 07 Aug 2014 Location: israel Online Status: Points: 5 |
Post Options
Thanks(0)
|
[QUOTE=carmona] hello
the post is relevant. Im looking for the "day light control unit" and all I have funde is relay-25230-9f905snd Im not sure its the unit. I hope for help. add some pic' CARMI p12 2007 2.0 |
|
damn...
|
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(1)
|
DAYTIME LIGHT OPERATION When the engine running, the lighting switch in the OFF position, power is supplied l from alternator terminal 3l to daytime light control unit terminal 8, andl from daytime light control unit terminal 2l through daytime light control unit terminal 5l to terminal of LH headlampl from daytime light control unit terminal 3,l through daytime light control unit terminal 4l to terminal of RH headlamp, andl from daytime light control unit terminal 1l through daytime light control unit terminal 10Ground is supplied to terminal 2 of each headlamp through body grounds E10 and E58. I'm not sure where it is located but looking at the wiring diagram Page LT20 in the ESM it will have a 2No 6 wire connectors and two earths to it |
|
carmona
NPOC Guest Joined: 07 Aug 2014 Location: israel Online Status: Points: 5 |
Post Options
Thanks(0)
|
thanks for the reply.
i was striping down the driver interior and cold not fund any unit as the diagram in ESM but my model is whit no xenon lights. it's the "conventional type". i have realy no idea where to look for. my front day light not working and the tail light. also the consoul not shift to night mode while i'm cminge the lights to on... |
|
damn...
|
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
is yours a north European model or Japanese import? Have you checked your fuses? Nos 32, 42 41 10 21
|
|
Post Reply | Page <123> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |