Nissan Primera p12 heated seat switched wiring |
Post Reply |
Author | |
GrahamP12
NPOC Guest Joined: 25 Jan 2019 Location: Glasgow Online Status: Points: 5 |
Post Options
Thanks(0)
Posted: 23 Mar 2019 at 1:05pm |
Hi and thanks in advance if anyone can solve this riddle for me.... I have a 2006 1.8 sx with cloth mechanical unheated seats,but got myself a bargain full leather heated interior.Fitting the seats and wiring up the adjusters isnt gonna pose me any problems,but the wiring for the heated seat switches,without a couple of tips,could be. In the wiring diagrams for the switches the terminals are numbered 1-6.However,on the actual switches, the terminals are identified 1A,2A,3A,1B,2B,3B,which doesnt correspond with the manuals' diagram,and,as I dont have the plugs that plug into the switches,I cant follow the colour-codes. Anyone out there that can help me out with this one? Graham.
|
|
roy.2
NPOC Elite Member Joined: 23 Jan 2010 Location: Nr Bourne Lincs Online Status: Points: 3975 |
Post Options
Thanks(1)
|
Hi Graham. Have you downloaded the free service manual from here as that may help you out.
|
|
Roy
|
|
GrahamP12
NPOC Guest Joined: 25 Jan 2019 Location: Glasgow Online Status: Points: 5 |
Post Options
Thanks(0)
|
hey Roy, yes I have the manual.Thats what gave me the wiring diagram with the numbered switch,but thanks for getting back.
|
|
imckay
NPOC Member Joined: 11 Mar 2007 Location: Manchester Online Status: Points: 3374 |
Post Options
Thanks(1)
|
3 Operational Connections
Ignition 12V Supply Out Low Out High They should be easy to identify with a Multimeter. Assuming Terminal 1A is the 12V Supply Terminal 2A is Low Out Terminal 3A is High Out Switch to Low. Continuity from 1A to 2A Switch to High. Continuity from 1A to 3A Check there is no Continuity from 2A to 3A with the Switch in all 3 positions The other 3 Connections are then pretty easy to identify 1 Ground for the Indicator Light that shows you the Heated Seats are on. With the 12V Supply connected and the Switch set to High or Low apply ground to the 3 remaining Terminals one at a time will indicate which is the Indicator Light Ground Terminal. The remaining 2 are Illumination when your headlights are on. Lights on 12V to one Terminal. Ground to the other. Doesn't matter which way round you wire them. |
|
GrahamP12
NPOC Guest Joined: 25 Jan 2019 Location: Glasgow Online Status: Points: 5 |
Post Options
Thanks(0)
|
Thanks m8.Very much appreciated.
|
|
Post Reply | |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |