Nissan Primera P12 key programming |
Post Reply |
Author | |
petterg
NPOC Guest Joined: 01 Jun 2014 Location: Norway Online Status: Points: 396 |
Post Options
Thanks(0)
Posted: 23 Oct 2016 at 9:24am |
I've trying to remove a lost key from the programming of my 2004 (post facelift) P12, F9Q. Following instructions in the FSM this is what I do: 1) Ensure all the doors have been unlocked 2) Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 3) Then turn ignition switch to OFF position. Leave key in ignition switch. 4) After 2 seconds, the system will enter programming mode and will flash the warning lights twice. Here it's failing - the lights doesn't flash.As the F9Q tends to be different from the other P12s in several aspects, and the FSM frequently don't mention how the F9Q is different, I'm wondering; Is there any other way to do key programming (without consult II) on the F9Q? |
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
Like you say the F9Q is different and as you say, you only have the one key at the moment and it is working perfectly well, so after unlocking all the doors with it, the process ought to work
Try this process taken from out of the 'how to' section:
Here is another set of instructions for the P12, which have been confirmed today (thanks to MasterRS):
Turn ignition on put key in while key is in on position press middle button (Audio Button) 5 times then super unlock 5 times then turn key from on to off position 6 times then remove key..press lock fob key 6 times then press unlock fob key 6 times.. your car will flash and lights come inside and out and it''ll manual override any errors and resync.. if you have no luck then try
And the P12 instructions (confirmed by 2 of our P12 members who have used and got them to work):
You can program a maximum of 4 P12 key fobs as follows:
Obtain all remote controls Switch ignition ON and OFF 6 times within 10 seconds After 2 seconds indicators will flash twice. Programming mode will be activated. Proceed as follows: Press & hold unlock button Press lock button 3 times Release unlock button Indicators will flash once to confirm correct programming Repeat above procedure to program any remaining remote controls After fourth key is programmed, indicators flash 3 times to confirm correct programming Switch ignition ON Indicators flash twice if 1-3 keys have been programmed Indicators DO NOT flash if 4 keys have been programmed Programming mode de-activated Check operation of all programmed remote controls |
|
petterg
NPOC Guest Joined: 01 Jun 2014 Location: Norway Online Status: Points: 396 |
Post Options
Thanks(0)
|
Thanks. Just to make sure I don't misunderstand
1) Turn ignition on 2) put key in Those two should be the other way around, right? Unless I misunderstand something. while key is in on position 3) press middle button (Audio Button) 5 times Is that the radio on / volume knob? 4) then super unlock 5 times What is a super unlock? |
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
I posted it exactly as written but I would agree, the first two steps need to be turned around
|
|
petterg
NPOC Guest Joined: 01 Jun 2014 Location: Norway Online Status: Points: 396 |
Post Options
Thanks(0)
|
I finally figured this out. The instructions in first post of this thread is the correct way. My issue was that I failed to follow the instructions! When instructions says turn key from off to on 6 times, I turned the key from position 1 to 3 to 1 to 3.... And I left the key in position 1. The correct way was to turn the key from position 1 to 3 to 2 to 3 to 2 to 3... and leave the key in position 2. When realizing that, the rest of the programming was easy.
|
|
Stoatwblr
NPOC Guest Joined: 21 Oct 2009 Online Status: Points: 33 |
Post Options
Thanks(0)
|
There's an undocumented gotcha for the original instructions - the car MUST be completely unlocked for the procedure to work.
If you only unlocked the driver's door you'll get the results described.
|
|
petterg
NPOC Guest Joined: 01 Jun 2014 Location: Norway Online Status: Points: 396 |
Post Options
Thanks(0)
|
I think that is what step 1 of the instructions say:
> 1) Ensure all the doors have been unlocked |
|
Post Reply | |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |