Nissan Primera P12 tyre pressure sensors reset Q ? |
Post Reply | Page <12345 6> |
Author | ||
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(1)
|
|
Start by alternating the left front and rear wheels. By the time you're on the third wheel you'll be done.
|
||
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
|
I don't understand why must me in the same order.
also is not more easily program the sensors again? I have 23 combinations left to do..but I need deflate and inflate every time..it is a pain...even if I take them wheels down and swap them around I still got the same no of combinations...how do I know is the correct one if I try your method? I let the keys inside the ignition and the error will disappear?
|
||
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
|
I don't understand what you mean by 23 combinations. Here's the logic. Your car has a tpms module that stores sensor IDs in the following order: FL, FR, RR, RL. If sensor ID 12356 has been originally registered in FL, then only cloned sensor ID with 123456 will work there. If you placed ID 78910 there it won't match/receive the signal. If you had a programmer (e.g. Consult) you could replace 123456 with 78910 in FL if you desire. But you don't have such programmer. So you can only copy the ID for use its originally registered location. You need not bother about specific tyre psi inflation. You could do anything from 32 all round.
|
||
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
|
Press the Info button on the multi-function switch till the tyre pressures are displayed. You might need to drive the car for a short distance for the pressures to be displayed. Admittedly cumbersome, but that's the only solution without a programming tool.
|
||
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
|
yes.i understand what you saying but i don't know the order of my old tyres..so it can be any of the following..1, 2, 3, 4; 1, 2, 4, 3; 1, 3, 2, 4,1, and so on..totally 24 combinations of changing my wheels...it will be a pain but I must do it.thanks
|
||
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
|
do I need have the engine on? or contact on?
|
||
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
|
Yes, engine running.
|
||
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
|
Not so many. As I suggested start by swapping the FL and RL. If neither displays a pressure then try FR and RR in any of the wheels on the left. Once one has matched the rest become easy.
|
||
justmirel
NPOC Guest Joined: 10 May 2016 Location: United Kingdom Online Status: Points: 21 |
Post Options
Thanks(0)
|
|
are you saying that at this moment they are all wrong and that's why none is displayed? I thought all of them must be in their places for the system to show something. by my experience, if one is dead it will not show any readings..
|
||
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
|
No they're independent. If one was dead, the others will display. Yes, they're not all correctly located at the moment. From your experience how have you addressed the issue when any was dead?
|
||
Post Reply | Page <12345 6> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |