Nissan Primera p12 odb port location
Printed From: Nissan Primera Owners Club
Category: General Open Forums - NO TRADING!
Forum Name: Nissan Primera Help & Queries
Forum Discription: NON Paying Members Q&A Section
URL: http://www.npoc.co.uk/forum/forum_posts.asp?TID=79129
Printed Date: 19 Apr 2024 at 8:39am
Topic: Nissan Primera p12 odb port location
Posted By: egor110
Subject: Nissan Primera p12 odb port location
Date Posted: 02 Oct 2017 at 7:35pm
|
Where's the odb port on a p12 ? I've poked around down by the fuse box and can't seem to find anything
|
Replies:
Posted By: timeshock!
Date Posted: 02 Oct 2017 at 8:13pm
| I take it it is a right hand drive car. While sat in the drivers seat just reach down by your left knee |
Posted By: egor110
Date Posted: 02 Oct 2017 at 8:34pm
|
Thank you , the quest continues tomorrow. Do i have to remove a panel or is it just the socket there ?
|
Posted By: roy.2
Date Posted: 02 Oct 2017 at 9:05pm
No panel to remove, just run your hand along the bottom of the trim and you will find the gap. 
------------- Roy |
Posted By: egor110
Date Posted: 03 Oct 2017 at 12:54pm
|
Thanks for your help , i've found it ! Got a p0113 and a p0102 code which i thinks all maf sensor related . Monday i unplugged the maf to see if the car ran any different ( previously it was loosing power uphills) so that kind of ties in with why it's thrown the codes. What sort of tool do i need to undo the maf ?
|
Posted By: imckay
Date Posted: 03 Oct 2017 at 6:42pm
To remove the whole MAF just a normal Screw Driver or Socket To remove the Sensor (at the top) usually a T20 Security Torx Driver. |