Print Page | Close Window

New member, reset procedure

Printed From: Nissan Primera Owners Club
Category: General Open Forums - NO TRADING!
Forum Name: New Members
Forum Discription: Say hello and introduce yourselves!
URL: http://www.npoc.co.uk/forum/forum_posts.asp?TID=79968
Printed Date: 29 Mar 2024 at 1:07pm


Topic: New member, reset procedure
Posted By: portal
Subject: New member, reset procedure
Date Posted: 11 Jun 2018 at 7:13pm
Hello npoc members , I'm here to discuss about car's fixing and problem solutions. I'm interested in electrical systems including engine and ecu programming. So to begin with I would like to ask a question - I have tryed to perform fuel pump / ecu reset procedure and to retrieve fault codes manually. I had done this procedure exactly as it is written, but nothing happened, mil did not start flashing. I have tryed this several times, but still nothing. Car - Nissan Primera P12 2003 2.2 dCi 102 kw. Could someone tell why I can't perform this procedure?



Replies:
Posted By: timeshock!
Date Posted: 11 Jun 2018 at 9:46pm

Hi and welcome to the forumHandshake

Assuming you have a euro model and not a Japanese import it ought to work,
Try this one:
This is the non timing critical method


1. Ignition "ON", count to 3.
2. Depress/Release accelerator pedal 5 times...hard and fast.
3. Count to 10 (not 7!) and fully depress pedal
4. Count to 12 (SES should be blinking), release pedal
5. Count to 10, depress pedal
6. Count to 10, release pedal.
7. Turn off ignition, then start engine. Done!




Print Page | Close Window