Well I had one key fob that did not work on our car so I was going to re-programme it to the car. Today whilst we are out we had trouble opening the car with the working key fob. I looked on youtube and found a video, copied the steps down and went out side to do it.

I managed to get the car into the "correct mode" BUT whilst carrying out the procedure the battery on the working key fob failed completely (totally flat) this happened before I had finished programming the first fob, the first step is naturally erasing the current key fob which means I was unable to programme the second fob with the new battery in (then going to replace the battery and go through the procedure again so I had 2 working keys but can not do that now.

The problem is though the car starts I can not lock the doors/boot at all and the car is parked out on the road as I have no drive or garage so help/advice is needed quickly.

Any help or advice will be gratefully accepted.

Many thanks,

Paul K.