Nissan Primera P12 IMMO Problem P1610 + P1612

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi I wonder if any of you experts can help I have had a Nissan Primera P12 2003 Petrol the last owner says he left the ignition switched on for 12 hours as someone said it would reset his radio code! and of course it had gone flat , since then it has not started. 
Had the scanner on it and has 2 codes P1610 Immo Locked and P1612 Immo/Dongle fault. The P1612 clears but does come back after a few failied starts. I have got the label off the bcm and got the imoo pin code I understand the immo code is 7787 for this. But it keeps saying inncorect code and will not let me log in to learn the key again.

Have read the transponder in the key and all info is showing
ID: 6D5A5C10
MODE: Locked
Chip: PCF7936
Type : 46 Crypt Philips

So far have tried disconnecting the battery to reset but no joy have checked the wires to the ignition transponder pick up(4 wire plug) and they all check out down to the BCM with no breaks. Also have closed the terminal up a bit on the ignition transponder pick up plug(4 wire) as I know these have issues. 
What should the voltage be at the transponder pick up plug as it is around .2 v
If the BCM was at fault then surely the remote locking would not work?
How can I test the BCM or ignition pickup reader? does anyone know what wires power/Ground  the BCM - Ignition reader as don't have any wiring diagrams for this car.
With ignition on the nats light just flashes doesn't matter if the ignition transponder pick up is connected or not. and the display screen just say secure.
I understand the radio will not work if it does not get the correct reading from the key is this correct? or could someone of fitted a radio from a different car and this could be causing the problem?

any help or advice ? 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Galee Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Mar 2013 Online Status: Points: 5	Post Options Post Reply Quote Galee Report Post Thanks(0) Quote Reply Topic: Nissan Primera P12 IMMO Problem P1610 + P1612 Posted: 12 Mar 2013 at 7:08pm
	Hi I wonder if any of you experts can help I have had a Nissan Primera P12 2003 Petrol the last owner says he left the ignition switched on for 12 hours as someone said it would reset his radio code! and of course it had gone flat , since then it has not started. Had the scanner on it and has 2 codes P1610 Immo Locked and P1612 Immo/Dongle fault. The P1612 clears but does come back after a few failied starts. I have got the label off the bcm and got the imoo pin code I understand the immo code is 7787 for this. But it keeps saying inncorect code and will not let me log in to learn the key again. Have read the transponder in the key and all info is showing ID: 6D5A5C10 MODE: Locked Chip: PCF7936 Type : 46 Crypt Philips So far have tried disconnecting the battery to reset but no joy have checked the wires to the ignition transponder pick up(4 wire plug) and they all check out down to the BCM with no breaks. Also have closed the terminal up a bit on the ignition transponder pick up plug(4 wire) as I know these have issues. What should the voltage be at the transponder pick up plug as it is around .2 v If the BCM was at fault then surely the remote locking would not work? How can I test the BCM or ignition pickup reader? does anyone know what wires power/Ground the BCM - Ignition reader as don't have any wiring diagrams for this car. With ignition on the nats light just flashes doesn't matter if the ignition transponder pick up is connected or not. and the display screen just say secure. I understand the radio will not work if it does not get the correct reading from the key is this correct? or could someone of fitted a radio from a different car and this could be causing the problem? any help or advice ?

timeshock! Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483	Post Options Post Reply Quote timeshock! Report Post Thanks(0) Quote Reply Posted: 12 Mar 2013 at 7:14pm
	Sounds like a trip to nissan to sort out your key issue, not sure if the radio issue is related or has been changed, if the latter what else has been changed? Both issues should be sorted by Nissan and take all the keys

Galee Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Mar 2013 Online Status: Points: 5	Post Options Post Reply Quote Galee Report Post Thanks(0) Quote Reply Posted: 12 Mar 2013 at 7:43pm
	Hi got some gear here to tackle it code reader key programer and such it's wiring diagram that could help lo.

Electrolyte Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Aug 2011 Location: Ba-Bru City Online Status: Points: 1369	Post Options Post Reply Quote Electrolyte Report Post Thanks(0) Quote Reply Posted: 12 Mar 2013 at 8:05pm
	You Can download the service manual from " How to " section. Edit: look to the Smart Entrance unit ,it contains the immobiliser
	If in doubt give it a clout!

Electrolyte Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Aug 2011 Location: Ba-Bru City Online Status: Points: 1369	Post Options Post Reply Quote Electrolyte Report Post Thanks(0) Quote Reply Posted: 12 Mar 2013 at 8:16pm
	Page BL-165 describes your fault codes
	If in doubt give it a clout!

Galee Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Mar 2013 Online Status: Points: 5	Post Options Post Reply Quote Galee Report Post Thanks(0) Quote Reply Posted: 13 Mar 2013 at 7:16pm
	Opps didn't look in sub section thank you just what I was in need of. Found the fault today faulty power wire to BCM from thre back of the fuse box repaired and car started all good! Agin thanks for the help

timeshock! Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483	Post Options Post Reply Quote timeshock! Report Post Thanks(0) Quote Reply Posted: 13 Mar 2013 at 7:34pm
	Good find

Electrolyte Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Aug 2011 Location: Ba-Bru City Online Status: Points: 1369	Post Options Post Reply Quote Electrolyte Report Post Thanks(0) Quote Reply Posted: 13 Mar 2013 at 8:29pm
	Brill Will have to write that one down.
	If in doubt give it a clout!

Galee Members Profile Send Private Message Find Members Posts Add to Buddy List NPOC Guest Joined: 12 Mar 2013 Online Status: Points: 5	Post Options Post Reply Quote Galee Report Post Thanks(0) Quote Reply Posted: 22 Mar 2013 at 8:14pm
	Also as I side note the smart entry system also operates the radio so check no 10 fuse if blown replace. if Blows AGAIN trace wiring and consolt P 12 FSM.