Nissan Primera P12 Stalling not starting |
Post Reply | Page 12> |
Author | ||
Sasnauskasdarius
NPOC Guest Joined: 04 Oct 2016 Location: enniskillen Online Status: Points: 39 |
Post Options
Thanks(0)
Posted: 06 Oct 2016 at 6:10pm |
|
hi all again :)
Changed scv idle improved litlebit if you can say that (reset ecu to ) stil extreme hard to start if it start its siting on 800 or so rpm but shacking like mad if i rev her she revs normal with plentyyy black smoke and then stalls , tried to pull injector connectors number 1 makes car stall 2 to stalls it , 3 and 4 makes a difference in engine running but dont stall it car is undriveble cos every time i lift foot off accelerator it stalls . please help me what would be my next move ? ps (all earth leads is ok ) Any specialist here who could help me . Thank you thats my old thread http://www.npoc.co.uk/forum/topic76622_post941749.html#941749 Just thought will start new one cos topic of old thread its not right
|
||
Slow fast
|
||
Sasnauskasdarius
NPOC Guest Joined: 04 Oct 2016 Location: enniskillen Online Status: Points: 39 |
Post Options
Thanks(0)
|
|
is there anybody who can help me please i m stuck on what to do
|
||
Slow fast
|
||
Sasnauskasdarius
NPOC Guest Joined: 04 Oct 2016 Location: enniskillen Online Status: Points: 39 |
Post Options
Thanks(0)
|
|
ps its 2004 2.2dci 160 000 miles on clock
|
||
Slow fast
|
||
roy.2
NPOC Elite Member Joined: 23 Jan 2010 Location: Nr Bourne Lincs Online Status: Points: 3976 |
Post Options
Thanks(1)
|
|
Hi Darius.Sound like you have solved your own problem. Faulty electrics or injectors on cylinders 3 and 4. I would start with the easiest 1st,the electrics.
|
||
Roy
|
||
Sasnauskasdarius
NPOC Guest Joined: 04 Oct 2016 Location: enniskillen Online Status: Points: 39 |
Post Options
Thanks(0)
|
|
thank you for a replay , but if injectors bad on 3 and 4 when i disconect one of them engine revs still droping Little bit so could this still be faulty i was thinking if 3 4 faulty so when i disconect them would be no change in engine runing ? and how do i go with electrical testing , i will have one spare 2morow so could swap or something and in my head is a question could it be not injectors but stretched timing chain ? thank you for help
|
||
Slow fast
|
||
Sasnauskasdarius
NPOC Guest Joined: 04 Oct 2016 Location: enniskillen Online Status: Points: 39 |
Post Options
Thanks(0)
|
|
swaped injectors still same , just noticed if you pull electric connector of number 3 car goes in limp mode
revs go up to 1100 and she not stalling runing smother , i realy stuck and dont know hat else i can do on her please help ? should i poull timing chain cover ?
|
||
Slow fast
|
||
Sasnauskasdarius
NPOC Guest Joined: 04 Oct 2016 Location: enniskillen Online Status: Points: 39 |
Post Options
Thanks(0)
|
|
anybody can help me please ?
|
||
Slow fast
|
||
p11primeragt
NPOC Guest Joined: 29 Jul 2011 Online Status: Points: 18750 |
Post Options
Thanks(0)
|
|
Which scv you changed? There's 2 of them on the p12's.
|
||
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
|
|
||
p11primeragt
NPOC Guest Joined: 29 Jul 2011 Online Status: Points: 18750 |
Post Options
Thanks(0)
|
|
Yup,sure he said somewhere in one of the threads it was 2005 so a dci engine |
||
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |