Nissan Primera P12 Airbag error - can't reset |
Post Reply | Page 12> |
Author | |
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
Posted: 12 Aug 2019 at 11:57pm |
Keep us posted.
|
|
BrianMccaul
NPOC Guest Joined: 12 May 2012 Location: Belfast Online Status: Points: 6 |
Post Options
Thanks(0)
|
Thanks so much for you detailed input gives me a chance of fixing the problems
|
|
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
Just a little correction. B0093 is for the left-hand side satellite sensor. With codes coming from the two satellite sensors, the fault might be with the air bag diagnosing sensor (the control unit).
|
|
Estyfort
NPOC Guest Joined: 16 Nov 2017 Location: Lagos, Nigeria Online Status: Points: 116 |
Post Options
Thanks(0)
|
Either of these two units could be involved: the first is the Air bag diagnosis sensor unit which is installed under the center console; and the other is the RH satellite sensor installed at the underside of right-hand center pillar. However, all the codes you've posted (which should be prefixed with the letter B) suggest a failure of the satellite sensor. It may have gone bad altogether or it has a corroded harness. You said you've placed an order for the "Control Unit." Which of the two parts? For the 2002 model the part number of the diagnosis sensor is: 98820-AV225 (or 98820-AV21J); for the satellite sensor it is: 98830-AV625 (98830-AY025). At all events, check that the wiring connecting the two parts are still very intact.
|
|
BrianMccaul
NPOC Guest Joined: 12 May 2012 Location: Belfast Online Status: Points: 6 |
Post Options
Thanks(0)
|
Sorry forgot to add codes from the diagnostic unit blow:
00C6 - CONTROL UNIT 00CC - CONTROL UNIT 003B - CONTROL UNIT 00C1 - CONTROL UNIT 0083 - Satellite sensor (RH) Comm fail 0093 - Satellite sensor (RH) Comm fail |
|
BrianMccaul
NPOC Guest Joined: 12 May 2012 Location: Belfast Online Status: Points: 6 |
Post Options
Thanks(0)
|
Hi,
I have been having trouble with my 2002 wp12 airbag light also. I have followed all the advice above but no joy? I got a guy out and his unit Launch x431 pro 3 gave these results but couldn't clear the codes from the control unit. The car is in Spain and was sitting for 7 months and the battery died, I'm not sure if this would contribute to the problem? The car has never been crashed so I'm confused as to how these codes can be cleared, on an off chance, i have sent off for a used part Control Unit withe exact part numbers etc, so am waiting on it arriving here to Spain. Any help or advice would be very much appreciated. Brian
|
|
imckay
NPOC Member Joined: 11 Mar 2007 Location: Manchester Online Status: Points: 3374 |
Post Options
Thanks(0)
|
Bienvenido Rafael
http://www.npoc.co.uk/forum/nissan-primera-p12-pollen-cabin-filter-change_topic55661.html
|
|
RafaelP12
NPOC Guest Joined: 11 Oct 2016 Location: Chile Online Status: Points: 1 |
Post Options
Thanks(0)
|
Hola soy de chile tengo p12 2.0 2006 tengo a mi no me parpadea esta fijo la luz de airbag y ademas abs.
Donde se ubica el filtro de polen ? |
|
petterg
NPOC Guest Joined: 01 Jun 2014 Location: Norway Online Status: Points: 396 |
Post Options
Thanks(0)
|
I've changed pollen filter in both of my P12's today, for the first time. They've surely done their job. I'd recommend to use a vacuum cleaner with strength control and vacuum lightly on top of the filter before you pull it out. If you don't loads of crap will fall down into the 'clean' side of the tubing.
|
|
timeshock!
NPOC Guest Joined: 29 Jan 2006 Location: Newcastle Online Status: Points: 14483 |
Post Options
Thanks(0)
|
Yes the should be washed annually and changed every two years it can lead to premature failure of the Blower amplifier. ( I don't know of anyone who washes them)
|
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |