Hello Everyone! New member from Russial with a P12 |
Post Reply | Page <1 23456 7> |
Author | |
imckay
NPOC Member Joined: 11 Mar 2007 Location: Manchester Online Status: Points: 3374 |
Post Options
Thanks(1)
|
Welcome to NPOC
Very interesting posts Is your Primera from Russia? I have looked at Russian Primera Club Website and there seem to be a mix of imported Japanese and European. |
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
Yes. My Primera from Russia. She bought from an official dealer new. I am the second owner. But I had the opportunity to thoroughly study the history of this сar on the service base of the dealer. And I knew the owner well.
They collected them in England. But the quality of plastic and bodywork is worse than that of Japanese Primera. The English are more like European and Russian Primera. Japanese are Primera the principle others Primera.
|
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
We sometimes met near my garage. Diagnosed cars suspension, engine, well, and listened to various strange noises.
And then they met a man from St. Petersburg and his station wagon. From left to right. Universal 2.0 variator luxury package (xenon, hatch, leather interior), sedan 1.8 manual transmission. And my 1.6 manual transmission. Have looked the versatile person, have felt. I liked the body type myself, but for myself I would like 2.0 with a mechanical transmission (unloved automatic transmissions). I already wrote that in Russia they love more sedans, then there are universals, but hatchbacks do not take root. |
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
Almost immediately after
the purchase, I changed the headlight washer to a separate button. Button for
circuits with high current so putting it without a relay. From the BSM block,
the appropriate (+) wire was cut off and connected to the button contact. (-)
screwed somewhere in the vicinity of the steering column. From a positive
headlight washer does not work when the windshield washer is working. We test the revision. I went this week. I removed the plastic that is under the steering wheel. Cut out the hole of the desired diameter. Button in place General view after. |
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
Have a nice time of day. If I'm still not bored with you, then I will continue
to give you a brief introduction to the car. The one on the left in the photo was bought in 2 copies (I do not know what it is from) and installed in the back door.
The one that is on the right of the photos from the car LADA 2108 is the highlight number. It was bought 3 pieces. One in the backlight of the glove box, http://imagizer.imageshack.us/v2/800x600q90/924/AQh7in.jpg"> the other two on the highlight of the legs. Since I do not like LED tape hanging just like that, I decided to put these lights on. Regular glaze of the glove compartment, and a lampshade from LADA - 2108.
In all plafonds, lamps
with six LEDs were installed. In the future I think to remove the lamps and put
a LED ribbon (warm white light) in the ceiling lamps, the cold white is already
bored. |
|
roy.2
NPOC Elite Member Joined: 23 Jan 2010 Location: Nr Bourne Lincs Online Status: Points: 3976 |
Post Options
Thanks(1)
|
Great work Sergey. Keep it up
|
|
Roy
|
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
Many thanks. We are trying. Now I do less work on the improvements, the main one has already done. Now I do very little things. It is now necessary to repair the BSM unit and to correct the earlier bypass of this block. The light in the salon does not work now.
|
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
With your permission, I will continue. In the car, the rear speakers were replaced. The regular speaker stopped playing, it was not possible to find a replacement on the disassembly. So I bought a set of 2 speakers and 2 tweeters. Well, why did I decide to put them in the back doors. Pishchalki also did not remain idle and were installed in the rear shelf.
I like sounding. I think now the front part of the acoustics, too, to change, but I want a good 3-component separate. And where to put the low frequency, without reworking the entire interior, did not come up with yet. As was the vibration isolation of the doors. He did it only so that the speakers did not play in the iron door. The effect is sound became more pleasant. Well, the doors have become heavy and close with a deaf duel, and do not ring loudly. To install new speakers, we had to cut out rings from plywood. With a tool, this is not difficult. Compare the speakers We install the ring at the door. Sorry in the last message one picture is not inserted |
|
Blue
NPOC Elite Member Sick End Joined: 24 Mar 2006 Location: Swansea Online Status: Points: 18458 |
Post Options
Thanks(0)
|
These are some really nice mods you and friends are doing, great work!
|
|
|
|
Zapoy
NPOC Guest Joined: 26 Mar 2017 Location: Russia Perm Online Status: Points: 48 |
Post Options
Thanks(0)
|
Thank you. Well, I mostly do for myself, well, and often for the sake of interest, to get or not something from electrical improvements.
|
|
Post Reply | Page <1 23456 7> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |