Nissan primera wp11 144 2.0 rear bearing |
Post Reply |
Author | |
Nissan p11 144
NPOC Guest Joined: 08 Apr 2018 Location: Denmark Online Status: Points: 45 |
Post Options
Thanks(0)
Posted: 13 Nov 2019 at 1:33pm |
Heeey helpsome People..
How much should i tighten the bolt Holding the rear bearing? I have been forced to take it apart, for making a new brake disc shield.. it should be described in the haynes manual- but i haven’t recieved mine from eBay yet.. Hope someone Can guide and help me.. it is the 30mm i am talking about... |
|
roy.2
NPOC Elite Member Joined: 23 Jan 2010 Location: Nr Bourne Lincs Online Status: Points: 3975 |
Post Options
Thanks(0)
|
I tighten mine until it is tight and then move it one way or the other so I can get the split pin in.
There may be a more scientific or proper way, but that has always done it for me!
|
|
Roy
|
|
Nissan p11 144
NPOC Guest Joined: 08 Apr 2018 Location: Denmark Online Status: Points: 45 |
Post Options
Thanks(0)
|
Thank you.. this type i have- do not have the split, so you have to knock it with the hammer.. Got a reply on Facebook 230nm- and that was what i trusted.. now the car is ready for the MOT.. 🤞🏻
|
|
Post Reply | |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |